Support
Installation Guide
A safe installation starts here. Follow these steps, or have it done by a licensed professional.
Before You Start
Estimated time: 1–2 hours
We strongly recommend having a licensed professional complete the installation to keep your warranty valid and ensure your safety.
1
Choose the location
Pick a well-ventilated spot near the water supply and rated for the unit's weight.
2
Mount the unit
Secure the heater to the wall using the provided bracket and hardware.
3
Connect the plumbing
Connect the cold water inlet and hot water outlet, checking every fitting for leaks.
4
Wire the electrical connection
Connect to a dedicated, properly grounded circuit sized for the unit.
5
Test before use
Fill the tank fully, check for leaks, then power on and confirm it heats correctly.